Descriptions
The
machine adopt single space door type structure, all tension,
compression and bending test are applied at the lower space. The
loadframe is consisted of two-column, ballscrew, upper crosshead,
middle crosshead and worktable, and the adjustable speed system is
installed underside of the worktable. High accuracy, wide range and
stable Japan Panasonic AC servo motor drive the ballscrew pair rotating
through syn-deceleration system, the ballscrew pair drive middle
crosshead, make the tension clamp(compression, bending) move up and
down, then realize load and offload to the specimen. This structure has
enough stiffness to apply high efficiency and stable moving. Key parts
are processed on the processing center to ensure the accuracy of the
load frame. Ballscrew is E5 class.
Specifications
- Capacity 10kn
- Accuracy + 0.5%
- Adjusment cope of stroke speed:
- 0.005mm/min-500mm/min
- Adjustment scope of speed
- Test speed <0.001mm/min,within the the 1.0% of installed value, while test speed ≥0.01mm/min,within the 1% of the installed value
- Accuracy of the constant load deformation and displacement control: Installed value ≥ 10%FN, within the 0.1% of the installed value;hile installed value <10%FN,within in the 0.2% of the value
- Length of the test space (mm): 800
- Width of the test space(mm): 370
- Dimension (mm): 775*500*1717
Content:
- Loadframe : 1 set
- Tensile test attachment: 1 pair
- Clamping Jaws : each 1 set
- Compression test attachment : -1 set
- Bending test machine : 1 set
- Tool kit : 1 set
- Photoelectric encoder : 1 set
- extensometer: 1 set
- Transfomer : 1 Pc
- Data-processing system : TimeWINWDW software-1 set
- servo speed adjusting system (Panasonic Japan):1 set
- Servo speed adjusting motor:1 set
- Industry computer (Lenovo brand):1 set
- Printer (HP 1468) :1 set
- Dimensions Load Frame: 2280*950*1052(mm)
- Dimension control part 1640*904*11008(mm)
0 komentar:
Posting Komentar